Polyline Command in AutoCAD - AutoCAD Commands

-

Polyline Command

Polyline:

A polyline is a connected sequence of segments created as a single planer object. You can create straight line segments, arc segments or a combination of two.

Polyline is also called PLINE and short form of pline is PL. You can also access Polyline command by clicking this icon.

You can also modify polyline. There are some modifications as below:
  • Arc
  • Close 
  • Halfwidth
  • Length 
  • Undo
  • Width
Sets the starting point for polyline
  • If you specify the second point, you draw line segments.
  • If you enter "a" (a for arc), you draw arc segments.

ARC:

The following prompts are displayed when you draw arc segments.
  • End Pont
  • Angle
  • Center
  • Close 
  • Direction
  • Halfwidth
  • line 
  • Radius 
  • second pt
  • undo
  • width
Watch the video about Polyline Command.
Also, Like our Facebook Page and YouTube Channel.

Comments

Post a Comment

Popular posts from this blog

How to Draw Arcs in AutoCAD - Arc Command in AutoCAD

-
Image
ARC Command: ARC: Arc is part of a curve, especially a part of the circumference of a circle. Command: The shortcut key of ARC command is "A". You can also access ARC command by clicking this icon There are different options/ways to draw ARC in AutoCAD. The default one is 3-point. Other options/ways written as below: 3-Point Start, Center, End Start, Center, Angle Start, Center, Length Start, End, Angle Start, End, Direction Start, End, Radius Center, Start, End Center, Start, Length Continue 3-Point: In 3-Point, you need to specify three points with the help of a mouse or keyboard. These three points are on the circumference. Start, Center, End: First, specify the starting point of the arc then center and then the endpoint of the arc. Start, Center, Angle: The first point you specify on the screen is the starting point. Then you need to specify the center point as above and then give the angle to give direction. Star
Read more

what is the difference between line and polyline in AutoCAD?

-
Image
Difference between Line and Polyline (Pline): The Line and Polyline are two commands with different properties in AutoCAD. In Line Command every time we click, the part between two points.  The Line Command allows you to create a single straight line or a chain of straight lines.  When we select a polyline it selected as a whole object. On the other side when we select Line it is selected as a single line segment.  We can edit Polyline with " PEDIT Command ". On the other side, there is no specific command to edit line. Pline Command can draw curve segments as well as line straight ones but Line Command can draw only line segments. A polyline can have width but a line has no width. After drawing a polyline, you can use the PEdit Command to reshape the polyline into a smooth, flowing curve based on the vertex points you selected but you cannot do this with the line. We can select one line among the chain of lines to edit the drawing. However, in the  Polyline
Read more